In the woods, a circular saw is most important, and nothing is more frustrating than the sudden stopping of the saw during work. Most people ask why does my circular saw keep stopping?
Reasons Why Does My Circular Saw Keep Stopping?
There are multiple reasons behind it. A circular saw is a handheld power tool that is used to cut through the material.
It has a blade that spins around and cuts through the material. The saw is held in place by a handle and guided by a trigger.
The user presses the trigger to start the blade spinning and then guides it through the material. The blade will stop spinning when the trigger is released.
Dull Blades
One reason might be that the blade is dull. When the blade is dull, it can’t cut through the wood as quickly, so the saw has to work harder, which can cause it to overheat and shut off. To fix this, sharpen or replace the blade.
Clogging with Dust
Another possibility is that the saw is getting clogged with sawdust. This can happen if you cut a lot of lumber or work with particularly softwoods.
When the blade gets clogged, it can’t spin as freely, which again causes it to overheat and shut off. To fix this, clean out the sawdust from time to time.
Loose Bolts
If you’re having trouble with your circular saw stopping during use, it might be due to loose bolts. This is a common problem that can be easily fixed:
- Check the blade to make sure it’s properly tightened. If the blade is loose, tighten the bolts that hold it in place.
- Check the handle to make sure it’s properly attached. If the handle is loose, tighten the bolts that hold it in place.
- Check the motor to make sure it’s properly mounted.
If the motor is loose, tighten the bolts that hold it in place.
Poor Connection
If you’re having issues with your circular saw stopping during use, it’s likely due to a poor connection. This is a common problem that can be easily fixed:
- Check the power cord for any frayed or damaged areas. If the cord is damaged, it will need to be replaced.
- Check the connections between the saw and the power outlet. Please make sure they are tight and free of any debris.
- If the problem persists, it may be due to a faulty on/off switch.
The switch can be replaced at a hardware store or with a power tool repair kit. Circular saws are helpful for all types of cutting tasks, from ripping plywood to crosscutting lumber.
Improper Working of Motor
If you have a circular saw that stops, it’s likely due to improper motor working. This can be a frustrating problem, but there are some things you can do to fix it:
- Check the power cord to make sure it’s not damaged.
- Check the brushes on the motor. If they’re worn out, they’ll need to be replaced.
- Check the armature for any damage.
If you find any, you’ll need to have the saw repaired by a professional.
Voltage Issue
If you’re having issues with your circular saw stopping, it may be due to a high voltage issue. This can be caused by a number of things, including a bad power cord or a problem with the saw’s motor. Luckily, you can do a few things to fix the problem.
First, check the power cord to make sure it’s not damaged. If it is, replace it with a new one. Next, check the saw’s motor to see if it’s getting enough power. If not, you may need to replace the motor.
Fraying Power Cord
You’re not alone if you’re having trouble stopping your circular saw due to power cord issues. This problem is quite common, and you can do a few things to fix it.
First, check the power cord for any damage or fraying. If the cord is damaged, it will need to be replaced before using the saw again.
Next, check the connection between the power cord and the saw itself. Ensure that the Cord Lock Lever is locked, which can sometimes become loose and cause power interruptions.
Finally, if you’re still having trouble with the power cord stopping your saw, try using a different outlet.
Sometimes outlets can become overloaded and cause problems with powering devices. Plugging your saw into another outlet should solve the problem if this is the case.
Blade Size
Most circular saws come with a 7-1/4 inch blade, but some models can accommodate blades up to 8-1/4 inches. Using a saw with a too small blade can cause the motor to overheat and eventually fail.
So if your saw is starting to slow down, check the blade size to make sure it’s the right one for your saw.
If the problem isn’t the blade size, it could be entirely something else. Check the owner’s manual for troubleshooting tips, or take your saw to a qualified repair person to fix it.
Conclusion
In conclusion, if your circular saw keeps stopping, it is most likely due to one of the following three issues: the blade is dull, the saw is overloaded, or the motor brushes must be replaced.
You can get your saw running smoothly again by troubleshooting and addressing these issues.
