Having a pool during the summer is a cool and great idea. But it is tough and hard to drain the pool. Fortunately, there are many flexible ways to do it with just items. Here, you will learn how to drain a pool with a garden hose.

Draining the pool is intimidating, but don’t worry, you can do it. You can easily drain your pool with a garden hose with the right tools and knowledge. First, turn off the pump and filter system to prevent damage while draining.

Then, connect a garden hose to the drainage spout on your pool’s filter system and place the other end of the hose in an appropriate drainage area.

How To Drain A Pool With A Garden Hose

How To Drain A Pool With A Garden Hose?

By Simple Spigot Method

One method to drain your pool is through the Simple Spigot Method. This technique involves attaching a garden hose to the spigot at the bottom of your pool. Then, it will allow the water to flow out. To begin, turn off any electrical power connected to your pool, including the pump and filter.

Then, connect one end of your garden hose to the spigot valve. This valve is located at the bottom of your pool. Next, connect the other end of the garden hose to an area where you want water to flow. You can drain it to a nearby drain or grassy area. Ensure that gravity allows water to flow easily from your pool into this location.

Once you have made sure everything is in place securely, slowly open up the spigot valve until water begins flowing out. Keep an eye on how quickly it drains and adjust accordingly if necessary – depending on how large and full your pool is, it could take several hours or even a day or two to drain completely!

When finished draining, remove any remaining debris from inside before storing away equipment like ladders and diving boards until next summer comes around again.

Other Method On How To Drain A Pool Using A Garden Hose

Step 1: Know the Drainage Area

Determining the drainage area is the first step in draining your pool using a garden hose. Find out where the drainage point is and its distance from the pool. This step will help determine if the garden hose is long enough to reach the drainage area. Also, check the elevation of the drainage area; if it’s lower than the pool, the water will flow effortlessly.

Step 2: Gather The Right Tools

Before draining your pool, you need to gather the right tools. You’ll need a garden hose, a submersible pump, pliers, and a vacuum. The submersible pump will help remove the water from the pool, while the vacuum will help remove debris and dirt.

Step 3: Prepare The Pool

Once you have all the tools you need, the next step is to prepare the pool. You need to disconnect the pump and filter and turn off the heater and any other device connected to the pool. You should also remove the drain plugs and open valves to allow the water to flow freely.

Step 4: Connect The Hose To The Pump

Connect the garden hose to the submersible pump. Using pliers, you’ll need to fit the hose tightly around the pump’s outlet port, ensuring that no leaks or air pockets remain. Lower the pump into the pool until it sits on the bottom, near the main drain.

Step 5: Place The Hose In The Drain Area

The next step is to lay the garden hose in the direction of the drainage area, ensuring it is long enough to reach the drainage point. It would be best to use a stabilizer to prevent the hose from moving while the water drains.

Step 6: Start Draining The Pool

Turn on the submersible pump and watch as the water drains out through the hose. The water will continue to flow until it completely drains out, but you should monitor the draining process. Once the water level is low enough, shut off the pump and remove it from the pool.

Step 7: Clean The Pool

After the pool is drained, you need to clean it thoroughly. Use a vacuum to remove any debris and dirt that may have accumulated on the pool floor. You can also use a pool scrubber to remove any stubborn stains.

Step 8: Refill The Pool

Once you have cleaned the pool, it’s time to refill it. Please turn off the garden hose, remove it from the drainage point, and plug the drain plugs back in. Connect the pump, filter back to the pool, and turn on the pool system.

Safety Tips

  • Always wear gloves and safety glasses when handling the pump and hose around the pool.
  • Never handle the pump with wet hands or standing in a water-filled pool.
  • Keep electrical cords and connections dry. 


Draining a pool using a garden hose is a straightforward and inexpensive process that anyone can do. Following the steps carefully is essential to ensure your safety and your pool. Remember, safety should always come first in whatever task you undertake.

Similar Posts